日韩美视频网站-日韩美女在线播放-日韩美女一级视频-日韩美女视频一区-国产视频久-国产视频精选

EN CN
What is the working principle of a plastic injection molding machine?

2023-12-26

Plastic injection molding machine is a common equipment for processing plastic products. Its working principle is to convert solid plastic into the required plastic products through a high-temperature and high-pressure injection process. Below, we will provide a detailed introduction to the working principle of plastic injection molding machines.
The plastic injection molding machine mainly consists of an injection system, a locking system, a hydraulic system, a control system, and an electrical system. The working process is as follows:

Preparation work: Firstly, the operator needs to prepare the required plastic raw materials and transport them to the hopper of the plastic injection molding machine through a feeder. Then, install the mold correctly on the injection molding machine and confirm that there are no impurities on the contact surface between the mold and the injection molding machine.

Mold opening: Close the locking mechanism of the locking system and adjust the size and position of the mold to match the requirements of the injection process. Then, the injection system begins to heat and pre plasticize the plastic raw material, making it into a flowing molten state.

Injection: When the mold is completely closed and the pre plasticized plastic reaches the required temperature and melting degree, the injection system begins to work. The injection system mainly consists of an injection cylinder, a screw, and a nozzle. The screw in the injection cylinder begins to rotate, sealing the pre plasticized plastic material into the cylinder body and pushing it forward through the rotation of the screw, allowing the plastic material to enter the mold cavity through the nozzle.

Pressure maintenance and cooling: After the injection is completed, the injection cylinder stops rotating and maintains the injection pressure, allowing the plastic material to remain in the mold cavity for a period of time. This process helps the plastic material to fully fill the mold cavity and maintain the desired shape. At the same time, the cooling system begins to work, cooling the surface of the mold through circulating cooling water or gas, allowing the plastic raw materials to quickly solidify.

Mold opening and demolding: When the plastic raw material is fully solidified, the locking system starts to work, opens the mold, and then uses components with demolding functions such as ejector pins and top plates to push the plastic product out of the mold cavity. Usually, molds have the function of multiple cavities and can produce multiple identical or different plastic products simultaneously.

Tail cutting and leg closing: After the plastic product is demolded, the operator needs to cut the excess plastic material to ensure that the edges of the product are clean. Moreover, for some larger plastic products, it may be necessary to perform deburring, trimming, or leg closing treatments on the bottom.

The above process is the basic working principle of a plastic injection molding machine. Of course, the working principle of plastic injection molding machines may vary depending on different models and requirements. In actual production, operators also need to carry out machine debugging and maintenance work according to specific situations to ensure the quality and stability of injection molding.
Mobile version
WeChat public account
客服中心
工作時間

周一至周日

8:00 - 18:00

點擊這里給我發消息 銷售客服


請直接QQ聯系!
展開客服
主站蜘蛛池模板: 四虎成人免费| 国产自产c区| 34看网片午夜理| 日本在线亚州精品视频在线| 欧美一区二区三区免费不卡| 国产91一区二区在线播放不卡| 日本人成在线视频免费播放 | 国产精品黄网站| 国产成人精品自线拍| 精品综合| 国产资源在线视频| 欧美亚洲另类综合| 日本视频久久| 97伊人| 日韩不卡高清| 日韩精品免费一级视频| 欧美综合精品一区二区三区| 亚洲日本人成中文字幕| 姐姐的妹妹| 久久综合一区二区三区| 欧美中文字幕在线| 99热成人精品热久久66| 99久久精品费精品国产一区二 | 日韩草逼视频| 91精品国产乱码久久久久久| 亚洲日本人成中文字幕| 国产欧美日韩一区二区三区视频| 亚洲欧美国产精品久久久| 欧美精品一区在线看| 欧美一级特黄一片免费| www.四虎影院在线观看| 日韩欧美精品一区二区| 97视频免费观看2区| 国产福利小视频| 日韩中文字幕视频在线| 99视频精品| 成人三级在线观看| 亚天堂| 国产美女网站视频| 草草福利视频| 国产精品成人h片在线|